Pulleys

Mode

Tool

Tool set

Modes for Het gereedschap ‘Plaats symbool’

Pulley

Machine Components

The Pulley tool and Pulley - 3D tool share the same position on the tool set. Click and hold the mouse on the visible tool to open the Subsets list and select the desired tool.

The pulley object accommodates both round belts and V-belts, and up to ten grooves.

To insert a pulley:

Click the tool and mode.

Click to place the object, and click again to set the rotation. The first time you use the tool in a file, a properties dialog box opens. Set the default parameters. The parameters can be edited later from the Object Info palette.

Click to show/hide the parameters.

Parameter	Description
Outside Diameter	Enter the outside diameter
Groove Depth	Enter the groove depth
Groove Width	Enter the groove width
Groove Angle (deg.)	Enter the groove angle
Groove Radius	Enter the groove radius
Number of Grooves	Select the number of grooves (up to ten)
Dist. to First Groove	For multiple-groove pulleys, enter the distance from the left edge of the pulley to the center of the first groove
Distance Between Grooves	For multiple-groove pulleys, enter the distance between grooves
Face Width	For multiple-groove pulleys, this value is automatically calculated; for single-groove pulleys, enter the face width
Draw Recess (2D only)	Select Draw Recess to draw a recessed web, and specify the 2D parameters
Web Thickness	Enter the web thickness
Recess Diameter	Enter the recess diameter
Recess Corner Radius	Specify the recess corner radius
Recess Fillet Radius	Specify the recess fillet radius
Draw Hub (2D only)	Draws a hub
Hub Diameter	Enter the hub diameter
Hub Projection (Left/Right)	Specify the amount of projection for the hub on both the left and the right; a negative value indicates that the hub face is recessed
Hub Corner Radius	Enter the hub corner radius
Hub Fillet Radius	Enter the hub fillet radius
Draw Bore (2D only)	Draws a bore
Bore Diameter	Enter the bore diameter
Keyway	If a keyway is present, select the Square or Rectangular recommended size, or select Custom size. The square and rectangular selections apply the ASME-recommended size based on the bore diameter.
Width/Height	For custom keyway sizes, enter the width and height values of the keyway
Web Configuration (2D only)	Select the web configuration and then specify the 2D parameters, if any. When Holes are selected, their size can be specified as a percentage or diameter value.
Number	Indicate the number of holes or spokes for the sprocket (does not apply to Plain web configurations)
Size (10–100%)	For Holes (Percent) and Spokes web configurations, enter the percentage of the recess opening occupied by the holes or spokes
Center Distance	For Holes web configuration, specify the distance between the hole centers
Hole Diameter (2D and 3D)	For Holes web configuration, indicate the size of the holes
View (2D only)	Select the 2D view
Show Center Lines (2D only)	Draws the pulley with center lines
Show Root Diameter (2D only)	Draws the pulley with a root diameter