Bolts and nuts
Mode
|
Tool
|
Tool set
|
Modes for Tworzenie linii
|
Bolt and Nut (mm or inch)

|
Detailing
|
To insert a bolt and nut (mm or inch):
Click the tool and mode.
Click to place the object, and click again to set the rotation. The first time you use the tool in a file, a properties dialog box opens. Set the default parameters. The parameters can be edited later from the Object Info palette.

Kliknij, aby pokazać/ukryć parametry.Kliknij, aby pokazać/ukryć parametry.
Parameter
|
Description
|
Bolt Type
(inch only)
|
Select the bolt type
|
Nut Type
(inch only)
|
Select the nut type
|
Washer Type
|
Select a washer type
|
Bolt Size
|
Select the bolt size
|
Bearing Length
|
Specify the bearing length or click and drag the bottom bearing length control point to define the bearing length graphically
|
Bolt Length
|
For a custom length value, deselect Use Standard Lengths and enter the length under the bearing length; alternatively, click and drag the bolt length control point to define the length graphically
|
Thread Style
|
Select the bolt thread style
|
Top Washer/Top Lock Washer/Bottom Washer/Bottom Lock Washer
|
Draws the bolt with top and/or bottom washers and top and/or bottom lock washers
|
Nut
|
Draws the bolt with a nut
|
View
|
Select the 2D view
|
Use Standard Lengths
|
Automatically adjusts the bolt length to the nearest increment based on size; deselect to enter a custom length
|
Adjust Bolt Length
|
Automatically adjusts the bolt length based on the bearing length
|
Show Center Line
|
Draws the 2D bolt and nut with center line(s)
|

Bolts
Inserting fastener objects using the Fastener tool